Home   |  Company  |  Dealers   |   News  |   Kino U   |   Support   |   Contact Us
 
Home > Accessories > Battery
               
             
   
Battery
 

 

 



Kino Flo Lighting Systems partners with BlockBattery for newly introduced KF21 (NiMH) battery systems for its LED line.
The Kino Flo/BlockBattery systems are designed to work with the following Kino Flo LED products with DC capability:

Celeb 250 LED DMX
Diva-Lite 20 & 30 LED DMX
FreeStyle 31 & 21 LED DMX
Select 20 & 30 LED DMX

The KF21 battery can power 28.8V (20-34VDC) applications. Run time for Kino Flo products listed above is approximately
1 hour and 10 minutes at full brightness. When fixtures are dimmed, the battery will last longer.

Charge time is only 1.5 hours versus Lithium batteries that take approximately 4 hours to fully charge. Unlike lithium batteries, the Kino Flo/BlockBattery is also travel friendly with no travel restrictions BlockBattery Travel Documentation.

In addition to powering 28.8V, battery adapters may be used to access 14.4V to be used with products with 14.4V input. It’s like having two batteries for the price of one!


     
  Charger  
 
                                  BAT-BC1U                                 BAT-KF21
 

The Single Channel Fast Charger utilizes BlockBattery’s advanced microprocessor system and multi-level charge routines to quickly & safely, qualify, initiate and terminate charging of a nickel metal-hydride (NiMH) battery. It is designed to charge one Kino Flo/BlockBattery,
BAT-KF21
.

The Charger System, BAT-BC1U, includes a Single Fast Charger and universal power supply, 120W/48V with 3-Pin xlr.  Charge time is
1.5 hours.  Charge cycle is complete when all 3 LED’s are on steady.

Note:  For best long-term performance, avoid interrupting charge cycle during fast charge.  Avoid “top-off” charging a full battery just before use.  This is unnecessary and could elevate the voltage above equipment operating ranges and/or damage equipment being powered.

For more information, see the Operation Manual.

     
  Battery Mounts

 
 
                    BAT-MM1 Mafer Mount  
   
 

The Kino Flo/BlockBattery system includes a Mafer Mount, BAT-MM1, with 28.8V output with 3-Pin xlr, 3ft. The battery slides onto the mount and mounts onto a Mafer clamp.

The 3-pin xlr cable connects to the Select 20/30, Diva-Lite 20/30, FreeStyle 21/31 or Celeb 250 LED fixture.

The BAT-MB1 is an optional Battery Mount.  It includes a 5/8” Baby Pin and Receiver (16mm) and 28V Output with 3-Pin xlr, 3ft.

 
        BAT-MB1 Baby Mount
     
  Battery Adapters

 
 

Battery Adapters may be used to access 14.4V to be used with products that have 14.4V inputs:  BAT-BA Block/AB Gold Mount Adapter (14.4V Output); BAT-BV Block/V-Mount Adapter (14.4V Output).

     
 
          BAT-BA AB/Gold Mount Adapter  
     
 
            BAT-BV V-Mount Adapter  
     
     
     
    Battery Mount Dynacore  
 

   
  BAT-MD26-V
Battery Mount, Dynacore 26V

V-Lock w/ Baby Reciever/Pin (16mm), 3-pin xlr
   
  Kino Flo Lighting Systems introduces the new Battery Mount DynaCore 26V. The Battery Mount is specifically designed for our
LED products with DC capability:

Celeb 200/Celeb 201

The Battery Mount includes a 5/8” Baby Receiver and Baby Pin (16mm), 3-pin xlr and a V-Lock interface. (Batteries sold separately.)

As of September 1, 2016, the V-Lock mounting system will accept the following Dynacore or LITH batteries:
Dynacore – Model #DHB-200 (26V 200Wh)
LITH – Model #LH-230 (26V 230Wh)

For any newer battery models, see Dynacore website at www.dynacore-battery.com
   
  V-Lock
 
 

The battery locks into place with the V-Lock interface.

 

 
  Mounting

The 5/8” baby receiver allows the battery mount to sit onto a baby stand.  Kino Flo mounts with baby receivers can be mounted onto the 5/8” baby pin.

   
 
 

The 3-pin xlr cable connects to the Celeb 200/201 LED fixture.

   
 
Back to the top