The special design of the VistaBeam makes it versatile enough to use on a stand as a key or fill source, or mounted facing downward to lay down a smooth, even beam of soft light similar to a conventional tungsten area light, such as a 6,000 Watt “space” light with a diffusing silk skirt. However, unlike a hot light, the VistaBeam 600 (120VAC) operates coolly, and pulls only 10 amps of power (compared to 50 amps for tungsten). The VistaBeam can operate either daylight, or tungsten balanced lamps, or both at the same time.
Both the VistaBeam 600 (six lamps) and the VistaBeam 300 (three lamps) have a DMX control system, high output/standard output switching, individual lamp control, instant-on, dead quiet/flicker-free ballast performance, remote operation, reflector, louver, gel frame, center mount/yoke mount option, and stackable design. In addition, as accessories, the fixtures can be operated remotely via a hand held remote control and/or a SCR dimming/switching module.
Photometrics: at a distance of 10 feet, the VistaBeam 600 delivers more than 130 foot candles* of light using Kino Flo True Match® color-balanced lamps (CRI 95); using standard low color rendering lamps the light output at 10 feet is closer to 190 foot candles. Measured in LUX: At 2.5 meters the light output is approximately 2078 LUX using True Match daylight or tungsten-balanced tubes; or about 3000 LUX using low color rendering tubes.
For more information, contact Scott Stueckle, Kino Flo public relations at 818-767-6528 (voice), 818-767-7517 (fax), or sstueckle@kinoflo.com (email).
*All Kino Flo photometrics are measured in a blackout studio using a flat surface light meter. Light is measured at center beam.
|
